


                        The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


B57RF58 ITT/GENERAL CONTROL

B57RF58




                        700 Series - 24 Volt Combination
The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit® models are suitable for either natural or LP gas. The valve is factory set at 3.5” WC natural gas. A regulator cover plate is included to convert to LP gas.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


K47RB03 ITT/GENERAL CONTROL

K47RB03




                        The Robertshaw®  are designed for universal replacement applications in water tanks. All models feature a built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. The ECO is designed to detect over-temperature conditions and to open. Once opened, the control will not function and a new replacement will be required.Features and BenefitsModels include 5-1/2” sensing elementVarious inlet size, outlet size, regulator settings and shank lengthsRight hand or left hand threadsMultiple BTU capacities availableDomestic, commercial and recreational vehicle applicationsWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


G6 ITT/GENERAL CONTROL

G5 ITT/GENERAL CONTROL




                        700 Series - 24 Volt Combination
The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit® models ar suitable for either natural or LP gas. The valve is factory set at 3.5” WC natural gas. A regulator cover plate is included to convert to LP gas.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


B57R ITT/GENERAL CONTROL

B57R




The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.Features and BenefitsControls available for most refrigerant typesHigh-amp rated switch (SPST) design (O10-1402/O10-1483)Super Cap® capillary vibration protection systemNon-conductive front cover with captive screwAdjustable differential and rangeEasy-to-read scale plateVibration cone (absorbs and reduces vibration away from brazed joint)Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)The O16-624 control has additional features:Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404ACap included on all Australia temperature controls. Optional for all other regions


L-59P151 ITT/GENERAL CONTROL

L-59P151

G8 ITT/GENERAL CONTROL

B57RB68 ITT/GENERAL CONTROL

B57RB68

KX32 ITT/GENERAL CONTROL

KX32




The Robertshaw® 1980 Series Snap-Fit® Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures.
Features and BenefitsEasy burner installation with attached threaded nutStainless steel outer jacket for long life and resistance to heat blisteringCombination of copper and nickel alloys for good electrical conductivityMica washer to insulate from shorting conditionsTinnerman clip includedVarious lengths available for multiple applications


3000MG-48 ITT/GENERAL CONTROL

3000MG-48




The Robertshaw® 1980 Series Snap-Fit® Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures.Features and BenefitsEasy burner installation with attached threaded nutStainless steel outer jacket for long life and resistance to heat blisteringCombination of copper and nickel alloys for good electrical conductivityMica washer to insulate from shorting conditionsTinnerman clip includedVarious lengths available for multiple applications


3000MG-24 ITT/GENERAL CONTROL

3000MG-24




                        The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


K47RF08 ITT/GENERAL CONTROL

K47RF08

B57RBAD105 ITT/GENERAL CONTROL

B57RBAD105

B57RB25 ITT/GENERAL CONTROL

B57RB25




                        The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


B59R06 ITT/GENERAL CONTROL

B59R06

3000MG-30 ITT/GENERAL CONTROL

3000MG-30




                        700 Series - Line Voltage
The Robertshaw® 700 Series Line Voltage Gas Valves offer the same replacement flexibility as the 24 Volt combination controls. Line Voltage models are available in 120 and 240 Volts AC. Features include three-position outlets, multi-positional capability and capacities ranging up to 720,000 BTU.
Features and Benefits 

Slotted safety magnetGas cock dial marking Off - Pilot - OnAmbient temperature of -40°F to 175°FPilot outlet 1/4” tubingCover type for conduit connectionInlet filtered screenRoHS compliant


itt-general-control

Resources

About A2Z

Policies