Hose, Grease -15" X 3/8" X 3/8" for R F Hunter - Part# HF05015CAP

HF05015CAP

Switch, Power Unit (On/Off, Spst for Rf Hunter - Part # HF16WP

HF16WP

Switch, Power Unit (On/Off, Spst for Rf Hunter - Part # HF16

HF16

Hose, Grease - For Rf Hunter Part# Hf05015Cap

Hf05015Cap




                        The Robertshaw® 5300 Series Electric Thermostat is a snap-acting, single pole single throw (SPST) type thermostat. Most thermostats use silver contacts and have heavy-duty terminals for durability and sustained accuracy. The snapaction mechanism is precise and reliable. This direct acting series of thermostats is suitable for the commercial cooking industry.
Features and Benefits 

KN models are NAK filled diastats with temperature ranges up to 975°F (524°C)Rugged and compact design for versatility and long lifeBulb and capillary available in copper, nickel plated copper and stainless steel (most models)Plastic coating available for protection against moisture, dust, etc. (most models)Dials of heat resistant plastic availableRX millivolt models with hermetically sealed reed switchStem flat in down positionAmbient temperature 200°F (93°C)


150585 HUNTER MFG CO

150585




                        Adaptable control to replace OEM controls which govern the on/off compressor function. Includes break-off shaft, dial knob, and mounting bracket.
                        
                    

2810 HUNTER MFG CO

2810




                        These controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.Features and BenefitsNEMA 1 enclosure with non-conductive coverFront-located captive cover screwLarge, easy-to-read scale plateSUPER CAP® capillary protection systemUniversal mounting and compact designScrew terminals are raised and fully accessible for easy wiringLaser-welded bellows for extended lifeHeavy-duty plated steel frameSuitable for R12, R22, and R502 applications


102254 HUNTER MFG CO

102254




                        The Robertshaw® 780 Series Pilot Controls feature flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. When the thermostat calls for heat, the 780 series control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established.
The Robertshaw 780-845 lockout ignition control provides 90 seconds of spark, followed by a six minute time delay (purge) between ignition attempts. If the pilot flame is not sensed after three tries, the control goes into a one-hour lockout period. At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition.
Features and Benefits

Reduces truck stock inventory, saving space and moneyEasy-to-install with complete in-depth installation instructionsPilot and main valves draw 1 Amp at 0.5 power factorCombined load at 1.5 Amps at 0.4 power factor95% relative humidity noncondensing at 104°F


100-00808-02 HUNTER MFG CO

100-00808-02




                        The Ranco® 4-Way Reversing Valves are designed for heat pump applications such as window-type, unitary and split systems. They are the key component to provide heating and cooling from the heat pump system by reversing the flow direction of the refrigerant.
                        
                    

103265 HUNTER MFG CO

103265

Hose, Grease - For Rf Hunter Part# Hf05015Bap

Hf05015Bap

Hose, Grease - For Rf Hunter Part# Hf05022Bap

Hf05022Bap

Handle, Housing (Power Unit) for Rf Hunter

HF15

Handle,housing for Rf Hunter Part# HF15

The HF18D Wire Assembly from RF Hunter is available from Tundra Restaurant Supply.

RF Hunter - HF18D - Wire Assembly

HF18D

Wire Assy (120V) for Rf Hunter - Part # HF18D

R F Hunter HF18D Genuine OEM Replacement Part

R F Hunter HF18D Lead Wire, 6", 120V

Handle,housing for Rf Hunter Part# HF155

HF155

The HF155 5 in Stainless Steel Pull from RF Hunter is available from Tundra Restaurant Supply.

hunter - Page 12

Resources

About A2Z

Policies