


                        The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


O25-15035-00 BORG-WARNER (YORK)

O25-15035-00




The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.Features and BenefitsConvertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump downHigh-limit adjustment screwLow-pressure differential and range adjusting screwsSelector screw for manual or automaticReset buttonLow-pressure scale plateHigh-impact plastic cover with center mount screwHigh-pressure scale plateSuper Cap® capillary protection systemColor-coded for easy identification of pressure lineHigh-side capillary flare nut (silver)Low-side capillary flare nut (brass)Cap included on all Australia temperature controls. Optional for all other regions.


25-7206PL BORG-WARNER (YORK)

25-7206PL




The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.Features and BenefitsControls available for most refrigerant typesHigh-amp rated switch (SPST) design (O10-1402/O10-1483)Super Cap® capillary vibration protection systemNon-conductive front cover with captive screwAdjustable differential and rangeEasy-to-read scale plateVibration cone (absorbs and reduces vibration away from brazed joint)Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)The O16-624 control has additional features:Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A


O25-17028-00-1 BORG-WARNER (YORK)

O25-17028-00-1




                        The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.Features and BenefitsConvertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)A wide range of high-pressure manual or automatic reset controls can be replaced ( or O12‑4834)A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump downHigh-limit adjustment screwLow-pressure differential and range adjusting screwsSelector screw for manual or automaticReset buttonLow-pressure scale plateHigh-impact plastic cover with center mount screwHigh-pressure scale plateSuper Cap® capillary protection systemColor-coded for easy identification of pressure lineHigh-side capillary flare nut (silver)Low-side capillary flare nut (brass)Cap included on all Australia temperature controls. Optional for all other regions


25-7579PL BORG-WARNER (YORK)

25-7579PL




                        The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.Features and BenefitsConvertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/)A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump downHigh-limit adjustment screwLow-pressure differential and range adjusting screwsSelector screw for manual or automaticReset buttonLow-pressure scale plateHigh-impact plastic cover with center mount screwHigh-pressure scale plateSuper Cap® capillary protection systemColor-coded for easy identification of pressure lineHigh-side capillary flare nut (silver)Low-side capillary flare nut (brass)Cap included on all Australia temperature controls. Optional for all other regions.


O25-07139 BORG-WARNER (YORK)

O25-07139




The Ranco® O Series Single High Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.Features and BenefitsNEMA 1 enclosure with non-conductive coverFront-located captive cover screwLarge, easy-to-read scale plateSuper Cap® capillary protection systemUniversal mounting and compact designScrew terminals are raised and fully accessible for
easy wiringLaser-welded bellows for extended lifeHeavy-duty plated steel frameCap included on all Australia temperature controls. Optional for all other regions.


O25-13875 BORG-WARNER (YORK)

O25-13875




                        These controls provide extra protection to refrigeration compressors. G20 - Protects against loss of charge or evaporator freeze-up. G23 - Provides high head pressure protection.
                        
                    

O25-19983-00 BORG-WARNER (YORK)

O25-19983-00

O25-15054C001 BORG-WARNER (YORK)

O25-15054C001




                        The 3030-700 Series Uni-Kits® are designed as universal replacements for virtually all air conditioner controls. The 3030-700 Series is available as universal Uni-Kits or as NO-FUSS direct replacement controls which are shown below. The Uni-Kits provide the greatest possible O.E.M. application replacement coverage with a minimal amount of stock.  The 3030-700 Series Uni-Kits are available in a wide selection of temperature ranges and capillary lengths to fit virtually every replacement application. Select from ambient bulb, straight, or air coil capillary configuration. Uni-Kits include all necessary adaptor mounting brackets, dial shaft adaptors, dial drivers, mounting screws and installation instructions.
                        
                    

O25-1627-000 BORG-WARNER (YORK)

O25-1627-000




                        Adaptable control to replace OEM controls which govern the on/off compressor function. Includes break-off shaft, dial knob, and mounting bracket.
                        
                    

25-8799PB BORG-WARNER (YORK)

25-8799PB

25-8799-PB BORG-WARNER (YORK)

25-8799-PB




                        The Ranco® A22, A30 and 9530 Series Constant Differential Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.Features and BenefitsLaser-welded stainless steel bellowsFixed or adjustable temperature settingsHigh-amperage contactsPneumatic action provided by vapor-filled capillary or capillary with bulb sensing elementsConstant On or Off positions available.Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shaftsStandard 1/4” quick-connect terminals with optional screw terminals


O25-188555-000 BORG-WARNER (YORK)

O25-188555-000




                        700 Series - 24 Volt Combination
The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit® models are suitable for either natural or LP gas. The valve is factory set at 3.5” WC natural gas. A regulator cover plate is included to convert to LP gas.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


285-12011-108 BORG-WARNER (YORK)

285-12011-108

O25-10263C BORG-WARNER (YORK)

O25-10263C




The 3126 and 3127 Series Robertshaw® pressure controls are designed as replacements for existing Penn and Robertshaw devices used on air conditioning and refrigeration units.Differentials are calibrated to centers of pressure range of controlDifferentials will decrease slightly at lower end of range and increase slightly at higher end of range


2514742C BORG-WARNER (YORK)

2514742C

O25-07706 BORG-WARNER (YORK)

O25-07706




                        The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.Features and BenefitsControls available for most refrigerant typesHigh-amp rated switch (SPST) design (O10-1402/O10-1483)Super Cap® capillary vibration protection systemNon-conductive front cover with captive screwAdjustable differential and rangeEasy-to-read scale plateVibration cone (absorbs and reduces vibration away from brazed joint)Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)The O16-624 control has additional features:Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A


25-4331P BORG-WARNER (YORK)

25-4331P




                        These controls are designed to shut down a piece of equipment if the operating conditions begin to approach freezing (as water freezes it expands and will rupture the chiller barrel tubes). The 016-264 has a manual reset feature, necessitating human intervention in the event of a shutdown.
Type P32 Low Pressure Limit Control
The Ranco® P32 low pressure control provides freeze protection for low refrigerant protection on chillers and other refrigeration systems by sensing suction pressure. It is suitable for R12, R22 and R502 refrigerants. A time delay is provided to allow for startup in low ambient and momentary low pressure conditions during the run period. The timer is of the heated bimetal (warp) switch design with an ambient temperature compensator. Once the time delay period (standard is 120 seconds) has elapsed, the manual reset button must be depressed to restart the compressor. A five minute cool-down period is required before resetting.
                        
                    

borg-warner-york - Page 3

Resources

About A2Z

Policies