


                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


15565 UNI-LINE

15565




                        Slip-Fit® Dial Overlays for 4590 Series
                        
                    

28161 UNI-LINE

28161




The Robertshaw® 1980 Series Snap-Fit® Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures.Features and BenefitsEasy burner installation with attached threaded nutStainless steel outer jacket for long life and resistance to heat blisteringCombination of copper and nickel alloys for good electrical conductivityMica washer to insulate from shorting conditionsTinnerman clip includedVarious lengths available for multiple applications


1910-924 UNI-LINE

1910-924




                        The Robertshaw® 5225 Series Limit Control is designed for any appliance where temperature protection is needed. All 5225 Series controls are non-adjustable, factory calibrated, and feature negative biased power element diaphragms. The 5225 Series is a proven safety control for commercial and specialty applications. They are available in automatic or manual reset versions with temperature settings from 425°F to 600°F (218°C to 316°C).
Features and Benefits

Bulb and capillary assemblies available in nickel plated copperAvailable in manual reset or automatic operationControl function is designed to interrupt power in the appliance circuit at the calibrated temperature


23331 UNI-LINE

23331




                        The Robertshaw® electrical connectors are manufactured to Robertshaw specifications, and are UL and CSA approved. All terminals are packaged in attractive reusable clam shells and all the accessory tools are skin boarded for easy display.
                        
                    

73722 UNI-LINE

73722




                        The Robertshaw® electrical accessories are manufactured to Robertshaw specifications. The offering includes heavy-duty alligator clips, cable clamps and cable ties in a variety of sizes and colors.
                        
                    

73018 UNI-LINE

73018




                        The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves (2), and a main gas pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16” to enable it to fit a wide range of OEM replacement applications.
Features and Benefits 

Pilot outlet 1/4” tubing1/4” quick connect terminal typeAmbient temperature of -40°F to 175°FMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsRated as NEC Class 2Inlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and
LP/air mixturesRoHS compliant


63494 UNI-LINE

63494




                        710 Series - Low Capacity
The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.
Features and Benefits 

Low capacity with 3-13/16” H x 4-21/32” L x 1-29/32” W dimensionsGas cock dial marking Off - Pilot - OnAmbient temperature of -40°F to 175°FPilot outlet 1/4” tubingMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


773826441 UNI-LINE

773826441




                        Maximum Water Temperature for all Commercial Icemaker Valves is 160°F. Operating Pressure for all valves is 20-120 PSI.
                        
                    

16817 UNI-LINE

16817




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.
Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


15621 UNI-LINE

15621




                        The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.Features and BenefitsMade from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical propertiesDesigned to reach ignition temperature(s) within 17 secondsHave 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivityManufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protectionOperate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC


63477 UNI-LINE

63477




                        700 Series - 2-Stage 24 Volt
The Robertshaw® 2-Stage 24 Volt Gas Valves - standing pilot as well as intermittent pilot models - feature reliability, performance, flexibility and easy installation all in one compact control. These valves feature a manual valve (gas cock), inlet/outlet screens, pilot gas filter, and pilot adjustment key. Models have a slotted automatic pilot safety magnet to provide gas shut-off in case of a pilot outage.
Features and Benefits 

Pilot outlet 1/4” tubingTerminal type 1/4” quick-connectAmbient temperature of -40°F to 175°FMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesRoHS compliant


1200409 UNI-LINE

1200409




                        WEATHER RESISTANT HOUSING - This housing is a general purpose weather resistant enclosure meeting NEMA Type 4 specifications.HAZARDOUS AREA HOUSING - This housing is an explosion proof housing that meets Class 1, Groups C and D and Class II, Groups E, F, and G hazardous area classifications.
                        
                    

66201312210 UNI-LINE

66201312210




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.
Features and Benefits 
• Standard sizes from 6" x 6" to 36" x 36"
• Heavy duty extruded aluminum frame
• Nylon bushings for smooth operation
• Adjustable minimum position
• 2-wire stall type 24 VAC motor
• Direct coupled actuator
• Power consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VAC
• Motor cover with wiring strain relief insert
• 70 inch ounces of torque
                        
                    

2708-052 UNI-LINE

2708-052

28838 UNI-LINE

28838




                        Robertshaw® DAOP Series 3-Wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP 3-Wire damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to .5" diameter octagonal steel shafts which are supported by nylon bushings for smooth operation. DAOP 3-wire dampers are powered by a double stacked stall type motor providing 55 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position3-wire stacked stall type 24 VAC motorDirect coupled actuatorPower consumption is 4 watts at 24 VACBlade rotation is 90 degrees55 inch ounces of torque in 35 seconds


15892 UNI-LINE

15892

15604 UNI-LINE

15604




                        The RAM hot surface ignition controls are 24V AC. When the thermostat calls for heat, RAM's HSI control simultaneously energizes the hot surface ignitor and initiates current sensing function. Gas valve(s) remain closed until current sense threshold is reached. Once the current draw threshold has been reached or exceeded, the gas valve(s) and flame rectification circuits are energized. Upon proof of flame, the hot surface ignitor is shut off. Main burner flame is continuously monitored. Loss of flame detection results in RAM-H cycling to check the current draw of the hot surface ignitor. If the hot surface ignitor is below the current draw threshold, the gas valve(s) will remain off and the hot surface ignitor will remain on until the current threshold is reached.
                        
                    

10118 UNI-LINE

10118




For OEM Applications.




700 Series - 2-Stage 24 Volt
The Robertshaw® 2-Stage 24 Volt Gas Valves - standing pilot as well as intermittent pilot models - feature reliability, performance, flexibility and easy installation all in one compact control. These valves feature a manual valve (gas cock), inlet/outlet screens, pilot gas filter, and pilot adjustment key. Models have a slotted automatic pilot safety magnet to provide gas shut-off in case of a pilot outage.Features and BenefitsPilot outlet 1/4” tubingTerminal type 1/4” quick-connectAmbient temperature of -40°F to 175°FMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and
LP/air mixturesRoHS compliant


64196 UNI-LINE

64196

2715-071 UNI-LINE

2715-071




                        The 1830-700 Series Pilot Uni-Kits® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8”. These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".Features and BenefitsMany flame pattern types availableThermocouple or thermopile optionsSpark electrode availableHorizontal or vertical gas inletSeveral mounting bracket types availableAerated pilots with non-linting characteristics


63098 UNI-LINE

63098




                        Electric oven and electrically controlled gas oven thermostats.
                        
                    

92111 UNI-LINE

92111




                        The ERT model thermostat carries a higher electrical rating than the gas oven thermostats. This model breaks one side of a 250V AC back or broil element. The ERT cycles the element in the range cavity to regulate temperature. Shaft rotation is clockwise to increase temperature. There is increased cam rise on the cam shaft to provide a positive OFF. This thermostat is ambient compensated to 180°F.
                        
                    

16613 UNI-LINE

16613




The 3450 Gard-Pak V® motor protector utilizes three PTC (Positive Temperature Coefficient) sensors connected in parallel or series depending on application. The 3450 may serve as a direct replacement for Robertshaw's MP50 Series or as a functional replacement for Texas Instrument 3AA and 15AA Series modules. (Refer to ordering information for specific models.) Models are available for 24, 120 or 208/240 volt control systems. 3450 models have the same resistance and voltage trip and reset points (depending on model) as Texas Instrument models. Models also offer the additional features of time delay on break and constant low voltage monitoring. The 3450 models incorporate three functions into one control:1. The sensor circuitry, responding to varying resistance from the PTC sensors will automatically shut down the equipment if the temperature in the stator windings exceeds the factory-calibrated resistance trip point. The unit will automatically reset once the windings have cooled to a point where motor damage will not occur, provided the time delay and voltage reset requirements have also been met.2. Models have a 2-minute delay on break to minimize short cycling and to allow adequate time for pressures to equalize before any attempt is made to restart the system.3. The constant low voltage monitoring circuitry is designed to shut down the equipment if the supply voltage drops below the factory-calibrated minimum. In the event of a low voltage shutdown, the equipment will not restart until both the time delay and voltage reset requirements have been met. Nuisance shutdowns, due to voltage spikes, are eliminated because the input voltage must remain below the low voltage trip point for at least 320 milliseconds before module will shut down the equipment.


uni-line - Page 298

Resources

About A2Z

Policies