


                        Robertshaw® DAOP Series 3-Wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP 3-Wire damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to .5" diameter octagonal steel shafts which are supported by nylon bushings for smooth operation. DAOP 3-wire dampers are powered by a double stacked stall type motor providing 55 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position3-wire stacked stall type 24 VAC motorDirect coupled actuatorPower consumption is 4 watts at 24 VACBlade rotation is 90 degrees55 inch ounces of torque in 35 seconds


2716-171 UNI-LINE

2716-171

2715-194 UNI-LINE

2715-194




Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


DA1212E2-NC UNI-LINE

DA1212E2-NC




Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.
Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


DA1216E2-NC UNI-LINE

DA1216E2-NC




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.
Features and Benefits 
• Standard sizes from 6" x 6" to 36" x 36"
• Heavy duty extruded aluminum frame
• Nylon bushings for smooth operation
• Adjustable minimum position
• 2-wire stall type 24 VAC motor
• Direct coupled actuator
• Power consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VAC
• Motor cover with wiring strain relief insert
• 70 inch ounces of torque
                        
                    

2708-852 UNI-LINE

2708-852




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


DA0614E-NC UNI-LINE

DA0614E-NC

2715-217 UNI-LINE

2715-217

66201310514 UNI-LINE

66201310514




                        Body Material for all Valves is Polypro. Operating Pressure Range for all Valves is 20-120 PSI. Maximum Water Temperature for all valves is 160°F.
                        
                    

66201311539 UNI-LINE

66201311539

K-57209-18 UNI-LINE

K-57209-18




                        These heavy duty 15 amp Paragon® timers are being used by the OEM manufacturers today. They will replace both the older classic design timers and the new OEM versions. Must be ordered in multiples of 12.
                        
                    

3002-105 UNI-LINE

3002-105




                        The Robertshaw® 1720 Series Thermomagnetic Safety Valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas. This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves.
Features and Benefits 

300°F (149°C) ambient temperature rated and 350°F (177°C) versions availableJ models available with separate pilot inlet/outlet tube connectionsK models are pilot outlet onlyCompatible with other Robertshaw models such as the BJWA, FD, and GS series thermostatsRoHS compliantWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


4020-007 UNI-LINE

4020-007




                        700 Series - 24 Volt Combination
The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit® models ar suitable for either natural or LP gas. The valve is factory set at 3.5” WC natural gas. A regulator cover plate is included to convert to LP gas.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


9990-030 UNI-LINE

9990-030




                        The Robertshaw® 5300 Series Electric Thermostat is a snap-acting, single pole single throw (SPST) type thermostat. Most thermostats use silver contacts and have heavy-duty terminals for durability and sustained accuracy. The snapaction mechanism is precise and reliable. This direct acting series of thermostats is suitable for the commercial cooking industry.
Features and Benefits

KN models are NAK filled diastats with temperature ranges up to 975°F (524°C)Rugged and compact design for versatility and long lifeBulb and capillary available in copper, nickel plated copper and stainless steel (most models)Plastic coating available for protection against moisture, dust, etc. (most models)Dials of heat resistant plastic availableRX millivolt models with hermetically sealed reed switchStem flat in down positionAmbient temperature 200°F (93°C)


9990-667 UNI-LINE

9990-667




                        The Robertshaw® 5300 Series Electric Thermostat is a snap-acting, single pole single throw (SPST) type thermostat. Most thermostats use silver contacts and have heavy-duty terminals for durability and sustained accuracy. The snapaction mechanism is precise and reliable. This direct acting series of thermostats is suitable for the commercial cooking industry.
Features and Benefits 

KN models are NAK filled diastats with temperature ranges up to 975°F (524°C)Rugged and compact design for versatility and long lifeBulb and capillary available in copper, nickel plated copper and stainless steel (most models)Plastic coating available for protection against moisture, dust, etc. (most models)Dials of heat resistant plastic availableRX millivolt models with hermetically sealed reed switchStem flat in down positionAmbient temperature 200°F (93°C)


9990-831 UNI-LINE

9990-831




                        The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


9990-023 UNI-LINE

9990-023




                        Convert "D" and "K" Series heat sensing/flame switch pilot ignition systems to "flame rectification" without replacing the existing gas valve. Use the cross-reference for the selection of the proper Modernization Kit. These modernization Kits are designed to replace the obsolete "D" and "K" Series Pilot Ignition Control Units. Included in each kit is a universal pilot mounting bracket with factory installed electrode and sensor, ignition control unit, wiring harness and complete-in-depth instructions.NOTE: The 780-704/705 modernization kits DO NOT include a new gas valve. They are designed to utilize the existing gas valve. The existing gas valve is at least 12 years old or older. We suggest that a complete new 712 series kit with a new gas valve be considered before using the 780-704 or  modernization kit.
                        
                    

4070-700 UNI-LINE

4070-700




                        These traditional Paragon® defrost timer kits have been designed and engineered specifically for the replacement timer market. Paragon, the leader in domestic defrost timer manufacturing, has these 25 kits available to replace over 95% of all refrigerator and freezer timers encountered in everyday service work.
                        
                    

3000-886 UNI-LINE

3000-886




                        The Robertshaw® 5000 Series Electric Thermostat is a heavy-duty thermostat designed for use in harsh applications where precise temperature control is required. The control uses a double pole single throw (DPST) snap-action mechanism with a positive OFF switch. It is recommended for use on applications that require double pole operation and accurate temperature control.Features and BenefitsDPST with positive OFFMechanical snap-action is instantaneous, positive and non-fatiguingReacts to exceedingly small movements of the diaphragms for very close temperature differentialDiaphragm assembly features two stainless steel diaphragms electrically welded togetherMaximum sensitivity without over-stressing the metalSupplied with terminals mounted in four different positionsBulb and capillary available in copper, nickel plated copper, or stainless steel


5000-203 UNI-LINE

5000-203




                        The 5140 Series thermostat is direct acting DPST for A.C. operation and cycles open on temperature rise. This series differs from the 5110 as it has two auxiliary SPST over-temperature cut-out switches. These cut-out switches are normally closed. Each will open one side of the circuit when dialed temperature is exceeded by 15° when bulb is in liquid, and 30° when bulb is in air. This provides double-pole cut-out. Once it is tripped, the over-temperature cut-out remains open until reset manually. U.L. file number E12103.
Specifications: 

Electrical Rating 35 Amps at 125V AC resistive load, 25 Amps at 250V AC resistive loadMaximum Ambient Temperature 150°F


9991-185 UNI-LINE

9991-185




                        The Robertshaw® 4200 Series Gas Thermostat is a heavy-duty, high capacity gas thermostat. These units are available with modulating only or with modulating snap-acting bypass. Both pilot and bypass adjustments are provided. Pilot outlets and customized settings are optional. They are available for a wide variety of applications such as deck ovens, convection ovens, baking ovens, and ranges.
Features and Benefits

Heat resistant materials and rugged designThe pilot and bypass keys are accessible and the pilot and keys are slotted for easy adjustment from the front of the controlProvides temperature control on most gas appliance systemsAllows for low temperature controlModulates the main gas supply and controls the bypass gas with a snap under the same thermostatic actionBulb and capillary assemblies supplied in copper, nickel plated copper or steel4-Way mounting positionRoHS Compliant


FDTO-1-06-54 UNI-LINE

FDTO-1-06-54




                        The Robertshaw® 4350 Series Gas Thermostat is a combination gas cock and by-pass type thermostat. It is available with both by-pass and pilot adjustments. With these thermostats, the gas is turned on and the temperature setting made with a single turn of the dial. The 4350 Series is available for a wide variety of applications, especially ranges and griddles.
Features and Benefits

Highly adaptable because of multiple orientations and number of outletsMounted, via flange nipple, above or below the manifoldAvailable with various temperature rangesFront adjustment for pilot and by-passModulating seat actionBulb and capillary available in copper, nickel plated copper and stainless steel


uni-line - Page 6

Resources

About A2Z

Policies