


                        The Robertshaw® 5300 Series Electric Thermostat is a snap-acting, single pole single throw (SPST) type thermostat. Most thermostats use silver contacts and have heavy-duty terminals for durability and sustained accuracy. The snapaction mechanism is precise and reliable. This direct acting series of thermostats is suitable for the commercial cooking industry.
Features and Benefits

KN models are NAK filled diastats with temperature ranges up to 975°F (524°C)Rugged and compact design for versatility and long lifeBulb and capillary available in copper, nickel plated copper and stainless steel (most models)Plastic coating available for protection against moisture, dust, etc. (most models)Dials of heat resistant plastic availableRX millivolt models with hermetically sealed reed switchStem flat in down positionAmbient temperature 200°F (93°C)


24195 UNI-LINE

24195




                        WEATHER RESISTANT HOUSING - This housing is a general purpose weather resistant enclosure meeting NEMA Type 4 specifications.HAZARDOUS AREA HOUSING - This housing is an explosion proof housing that meets Class 1, Groups C and D and Class II, Groups E, F, and G hazardous area classifications.
                        
                    

66201312210 UNI-LINE

66201312210

66201312211 UNI-LINE

66201312211

365D2 UNI-LINE

365D2

6000-117 UNI-LINE

6000-117

66201312212 UNI-LINE

66201312212

365D8 UNI-LINE

365D8

6000-106 UNI-LINE

6000-106




The 3030-400 Series Uni-Kits® feature a constant cut-in at 39°F. This constant cut-in on every cycle provides automatic defrost while maintaining food temperature at a safe level. Turning the dial will change the differential between the cut-in and cut-out temperatures, with cut-in always remaining fixed at 39°F. The 3030-400 Series Uni-Kits are available in a wide selection of temperature ranges and capillary lengths to fit virtually every replacement application. Uni-Kits include all necessary adaptor mounting brackets, dial shaft adaptors, dial drivers, mounting screws and installation instructions.Individually boxed in a strong corrugated carton for extra protection from damage during handling or shippingComplete label information - O.E.M. name and O.E.M. part numbers for handy referenceDetailed instructions for trouble-free installationU.L. and C.S.A. listed


77641 UNI-LINE

77641




                        The Robertshaw® 5210 Series Electric Thermostat is a direct acting, single pole, slow make and break type thermostat. Typical applications are for incubators, laboratory ovens, water baths, sterilizers, dishwashers, steam tables, scalding tanks and other equipment where a close temperature differential is required.
Features and Benefits 

Temperature ranges to 550°F (288°C)Single pole, slow make and break designVery sensitive to temperature changeSmall temperature differential between make and breakFine silver contacts to assure consistent switch action and long lifeRugged and compact design for versatility of applicationBulb and capillary available in copper or nickel plated copper


5210-305 UNI-LINE

5210-305




                        The 1890 series Pilot Uni-Kit® comes with a Natural gas orifice installed and includes a separate L.P. gas orifice. These Uni-Kits will fit 1/4" tubing and 3/16" tubing applications. For 3/16" tubing applications, simply remove 1/4" tubing fittings and 40-035 adaptor and then connect up existing 3/16" tubing.
                        
                    

9990-378 UNI-LINE

9990-378

28845 UNI-LINE

28845




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


16232 UNI-LINE

16232




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.
Features and Benefits 
• Standard sizes from 6" x 6" to 36" x 36"
• Heavy duty extruded aluminum frame
• Nylon bushings for smooth operation
• Adjustable minimum position
• 2-wire stall type 24 VAC motor
• Direct coupled actuator
• Power consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VAC
• Motor cover with wiring strain relief insert
• 70 inch ounces of torque
                        
                    

2708-052 UNI-LINE

2708-052

2714-001 UNI-LINE

2714-001

15581 UNI-LINE

15581




                        The Robertshaw® 5210 Series Electric Thermostat is a direct acting, single pole, slow make and break type thermostat. Typical applications are for incubators, laboratory ovens, water baths, sterilizers, dishwashers, steam tables, scalding tanks and other equipment where a close temperature differential is required.
Features and Benefits:

Temperature ranges to 550°F (288°C)Single pole, slow make and break designVery sensitive to temperature changeSmall temperature differential between make and breakFine silver contacts to assure consistent switch action and long lifeRugged and compact design for versatility of applicationBulb and capillary available in copper or nickel plated copper


9990-158 UNI-LINE

9990-158

28838 UNI-LINE

28838




                        Robertshaw® DAOP Series 3-Wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP 3-Wire damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to .5" diameter octagonal steel shafts which are supported by nylon bushings for smooth operation. DAOP 3-wire dampers are powered by a double stacked stall type motor providing 55 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position3-wire stacked stall type 24 VAC motorDirect coupled actuatorPower consumption is 4 watts at 24 VACBlade rotation is 90 degrees55 inch ounces of torque in 35 seconds


uni-line - Page 4

Resources

About A2Z

Policies