


                        Robertshaw® DAOP Series 3-Wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP 3-Wire damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to .5" diameter octagonal steel shafts which are supported by nylon bushings for smooth operation. DAOP 3-wire dampers are powered by a double stacked stall type motor providing 55 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism.Features and Benefits Standard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position3-wire stacked stall type 24 VAC motorDirect coupled actuatorPower consumption is 4 watts at 24 VACBlade rotation is 90 degrees55 inch ounces of torque in 35 seconds


2716-091 UNI-LINE

2716-091




                        The Robertshaw® 5300 Series Electric Thermostat is a snap-acting, single pole single throw (SPST) type thermostat. Most thermostats use silver contacts and have heavy-duty terminals for durability and sustained accuracy. The snapaction mechanism is precise and reliable. This direct acting series of thermostats is suitable for the commercial cooking industry.
Features and Benefits 

KN models are NAK filled diastats with temperature ranges up to 975°F (524°C)Rugged and compact design for versatility and long lifeBulb and capillary available in copper, nickel plated copper and stainless steel (most models)Plastic coating available for protection against moisture, dust, etc. (most models)Dials of heat resistant plastic availableRX millivolt models with hermetically sealed reed switchStem flat in down positionAmbient temperature 200°F (93°C)


9991-303 UNI-LINE

9991-303

DA2226E3 UNI-LINE

DA2226E3

2716-120 UNI-LINE

2716-120

2715-071 UNI-LINE

2715-071

DA1232E3 UNI-LINE

DA1232E3

2716-137 UNI-LINE

2716-137




                        The Robertshaw® 4290 Series Gas Thermostat is a snap-acting hydraulic thermostat and used to provide temperature control by interrupting gas flow to the burner. The 4290 Series gas thermostat is available for a wide variety of applications including small ovens, griddles, brooders, warming cabinets, and fryers.
Features and Benefits

Capable up to 30,000 BTUsAvailable in various temperature ranges, with temperature control up to 600°F (316°C)Snap-acting from Off position to full gas flowAdjustable bypass key and bypass settings are optionalApplicable to use with high capacity gas operated diaphragm valves (700-800 Series)Adapts to limited mounting spaceBulb and capillary assemblies supplied in nickel plated copper or stainless steelDials in heat resistant plastic are includedAmbient temperature is 300°F (149°C)


28464 UNI-LINE

28464




                        700 Series - 24 Volt Combination
The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit® models ar suitable for either natural or LP gas. The valve is factory set at 3.5” WC natural gas. A regulator cover plate is included to convert to LP gas.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FCombination screw/spade terminal typeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


700-403 UNI-LINE

700-403




                        Add-on stuffing box kits are used when an application requires a stuffing box and the replacement control does not have one built-on. These add-on stuffing box kits are designed to fit all capillaries and will fit all sensing bulbs up to 3/8" inch diameter. They are designed to convert a standard (non-stuffing box) control to fit a stuffing box application.
                        
                    

9991-325 UNI-LINE

9991-325



 Series Fan Control
The Ranco® Fan Controls terminate defrost, and delay the evaporator fan operation on electric heat, hot gas and reverse cycle commercial refrigeration systems.Features and BenefitsPrevents warm, moist air from being circulated into the refrigerated spaceRemote bulb sensingFactory-fixed low event for fan delay


9997-369 UNI-LINE

9997-369




                        The 5110 Series thermostat is direct acting DPST for A.C. operation and cycles open on temperature rise. This series differs from the 5000 as it also has an auxiliary SPST oven-temperature cut-out switch. This cut-out switch is normally closed. It will open one side of the circuit when dialed temperature is exceeded by 15° when bulb is in liquid, and 30° when bulb is in air. Once it is tripped, the over temperature cut-out remains open until reset manually. U.L. file number E12103.
Specifications
- Electrical Rating 35 Amps at 125V AC resistive load, 25 Amps at 250V AC resistive load
- Maximum Ambient Temperature 150°F


5110-103 UNI-LINE

5110-103




                        700 Series - Snap-Throttle Hydraulic
The Robertshaw® 700 Series Snap-Throttle Hydraulic Combination Gas Valves are thermostatically operated by a remote temperature sensing bulb. Models are available with single capillary or remote dial-in snap-action and snap-throttle types. Valves can be mounted in any position except upside down.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of 32°F to 175°FMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


1050205 UNI-LINE

1050205

700-425 UNI-LINE

700-425




                        700 Series - 2-Stage 24 Volt
The Robertshaw® 2-Stage 24 Volt Gas Valves - standing pilot as well as intermittent pilot models - feature reliability, performance, flexibility and easy installation all in one compact control. These valves feature a manual valve (gas cock), inlet/outlet screens, pilot gas filter, and pilot adjustment key. Models have a slotted automatic pilot safety magnet to provide gas shut-off in case of a pilot outage.
Features and Benefits 

Pilot outlet 1/4” tubingTerminal type 1/4” quick-connectAmbient temperature of -40°F to 175°FMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesRoHS compliant


1200414 UNI-LINE

1200414

1200409 UNI-LINE

1200409

1000-403 UNI-LINE

1000-403




                        700 Series - Millivolt
The Robertshaw® 700 Series Millivolt Gas Valves are wall thermostat actuated combination controls which provide installation flexibility from furnaces to swimming pool applications. The complete line of 700-500 millivolt gas valves offers a wide range of replacements from small
capacity 3/8” pipe to high capacity 1” pipe up to 720,000 BTU usage.
Features and Benefits 

Gas cock dial marking Off - Pilot - OnPilot outlet 1/4” tubingAmbient temperature of -40°F to 175°FTerminal type combination screw/spadeMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesRoHS compliant


304811393 UNI-LINE

304811393




                        The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.
Features and Benefits 

Quick and easy installationComplete in-depth instructions and trouble shooting informationUsed on natural gas systems only


63013 UNI-LINE

63013




                        710 Series - Low Capacity
The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.
Features and Benefits 

Low capacity with 3-13/16”H x 4-21/32”L x 1-29/32” W dimensionsGas cock dial marking Off - Pilot - OnAmbient temperature of -40°F to 175°FPilot outlet 1/4” tubingMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


737815414 UNI-LINE

737815414




                        710 Series - Low Capacity
The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.
Features and Benefits 

Low capacity with 3-13/16” H x 4-21/32” L x 1-29/32” W dimensionsGas cock dial marking Off - Pilot - OnAmbient temperature of -40°F to 175°FPilot outlet 1/4” tubingMaximum inlet pressure 14” WC (0.5 PSI)Standard NEMA terminalsInlet filtered screenVarious gas types: natural, manufactured, mixed, LP, and LP/air mixturesMultiple actuators availableRoHS compliant


773826441 UNI-LINE

773826441




                        The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.Features and BenefitsQuick and easy installationComplete in-depth instructions and trouble shooting informationUsed on natural gas systems only


700002 UNI-LINE

700002




                        Clear vinyl tubing is a clear, flexible tubing of plasticized poly vinyl chloride. It has a wide range of chemical resistance. Its clarity permits visual checks on flow. Its smooth, hard bore prevents interior build-up, is easy to clean and provides fine flow characteristics. It is flexible at 0°F and available in continuous lengths. Application: Good oil resistance, excellent resistance to acids, alkalis and many solvents except esters, ketones and aromatic hydrocarbons. Nontoxic FDA recipe for potable liquid. FDA approved. Dispenser Box - each roll is packed in a specially designed box to make it easier than ever to display and sell tubing. FDA Approved.SpecificationsColor: ClearSpecific Gravity: 1.21Tensile Strength: 1550 PSIElongation: 365%Durometer Shore A: 75 ± 5Brittle Point: -35°FToxicity: Nontoxic FDAMaximum Operating Temperature: 80°C (175°F)


63919 UNI-LINE

63919




                        Robertshaw® DAOP Series 2-wire Rectangular Control Dampers are designed to be used in zone control system applications and for the control of air flow in any duct system. Dampers are designed to work with pressure systems up to 1.2" W.C. All DAOP damper frames are constructed of heavy gauge extruded aluminum with galvanized steel mounting plate. Extruded aluminum blades are attached to a 0.5" diameter octagonal aluminum shaft which are supported by nylon bushings for smooth operation. DAOP dampers are powered by a single stall type motor providing 50 to 75 inch ounces of torque. Minimum blade adjustment is provided by an external locking mechanism. Dampers are spring open/power close and contain a "Lost Motion" breaking system that prevents backlash and shock to the motor gears, bearings and blade shafts when the damper is driven open by the spring return.Features and BenefitsStandard sizes from 6" x 6" to 36" x 36"Heavy duty extruded aluminum frameNylon bushings for smooth operationAdjustable minimum position2-wire stall type 24 VAC motorDirect coupled actuatorPower consumption of: light-duty E style, 5 watts at 24 VAC; heavy-duty E2 style, 6 watts at 24 VACMotor cover with wiring strain relief insert70 inch ounces of torque


uni-line - Page 5

Resources

About A2Z

Policies